国产精品秘 久久久久久,蜜臀色欲AV无码人妻,蜜桃av秘 乱码一区二区三区,国产中文字幕在线观看

當前位置:南通康誠重工機械有限公司 >> 新聞中心 >> 直線步進電機原理和應用簡介(英文)

直線步進電機原理和應用簡介(英文)


The linear stepper motor has been made flat instead of round so its motion will be along a straight line instead of rotary. A picture of a linear motor and its amplifier is shown in Fig. 11-69, and the basic parts of the linear motor are shown in Fig. 11-70. In this diagram you can see the motor consists of a platen and aforcer. The platen is the fixed part of the motor and its length will determine the distance the motor will travel. It has a number of teeth that are like the rotor in a traditional stepper motor except it is passive and is not a permanent magnet. The forcer consists of four pole pieces that each have three teeth. The pitch of each tooth is staggered with respect to the teeth of the platen. It uses mechanical roller bearings or air bearings to ride above the platen on an air gap so that the two never physically come into contact with each other. The magnetic field in the forcer is changed by passing current through its coils. This action causes the next set of teeth to align with the teeth on the platen and causes the forcer to move from tooth to tooth over the platen in linear travel. When the current pattern is reversed, the forcer will reverse its direction of travel. A complete switching cycle consists of four full steps, which moves the forcer the distance of one tooth pitch over the platen. ThTQLZ系列振動清理篩e typical resolution of a linear motor is 12,500 steps per inch, which provides a high degree of resolution. The typical load for a linear motor is low mass that requires high-speed movements.


FIGURE 11-69 A linear motor and its a振動分級篩mplifier.


FIGURE 11-70 The forcer is shown on 錘破機top of the platen of a linear motor. The electromagnets are identified on the forcer.

Theory of Oper振篩ation

The forcer consists of two electrom重型錘式破碎機agnets that are identified in Fig. 11-70 as magnet A and magnet B and one permanent magnet. The permanent magnet is a strong rare-earth permanent magnet. The electromagnets are formed in the shape of teeth so that their magnetic flux can be concentrated. In the diagram you can see that the forcer has four sets of teeth and these teeth are spaced in quadrature so that only one set of teeth is aligned with the teeth on the platen at any time.

When current is applied to the coil (field winding) of the electromagnets, their magnetic flux passes through the air gap between the forcer and the platen, causing a strong attraction between the two. The magnetic flux from the electromagnets also tends to reinforce the flux lines of one of the permanent magnets and cancels the flux lines of the other permanent magnet. The attraction of the forces at the time when peak齒輥式破碎機 current is flowing is up to ten times the holding force.

When a pattern of energizing one coil and then another is established, the resulting magnetic field will pull the motor in one direction from one tooth to the next. When current flow to the coil is stopped, the forcer will align itself to the appropriate tooth set and create a holding force that tends to keep the forcer from moving left or right to 刮板輸送another tooth. The linear stepper motor controller sets the pattern for energizing and de-energizing the field coils so that the motor moves smoothly in either direction. By reversing the pattern, the direction the motor travels is reversed.

Figure 11-71 shows a block diagram of the linear stepper motor controller. From this diagram you can see that it has a microprocessor that interfaces with a digital-to-analog converter, a force angle modifier, and a p慣性振動器ower amplifier. It also has a power supply for the amplifiers and it may have an accelerometer amplifier as an option. The microprocessor has ROM and EPROM memory to store programs.


FIGURE 11-71 A block diagram of a linear motor co振動粉碎機ntroller.

Applic裝車輸送機ations

The applications for a linear motor tend to be straight-line motion. These types of applications are slightly different from traditional stepper motor applications where the rotary motion is converted to linear motion with a ball and screw, rack and pinion, or other method. Figure 11-72 shows the linear motor used in a coil winding positioner application. The linear motor in this application is teamed with a servomotor that controls the speed of the coil winding mechanism. The linear motor determines the exact location of the next coil that is added to the spool. The speed of the linear motor can be increased or decreased when the machine is spooling larger-diameter or smaller-diameter wire. The ability of the linear motor to provide small incr粉體輸送設備emental steps makes it a good match for this application.


Figure 11-73 shows a sec給料盤ond application where the linear motor is used to transport a semiconductor wafer through a precision laser inspection station. The linear motor provides excellent locating ability for this application.

A Compumotor L-L20-P96 system acts as the traverse element to gu篩分機ide the wire, while a Z Series servo motor rotates the spindle. Both axes are coordinated by a Compumotor 4000 indexer preprogrammed to produce a number of different coil types. Precise position control and mechanical simplicity over a long length of travel are provided by the linear motor.


FIGURE 11-72 A linear stepper motor used in a coil winding application. The linear motor is used to control the position 送料盤of the coil winder.

In this application, the linear motor acts as a transport for semiconductor wafers. The L20 linear mot清理篩or system offers increased throughput and gentle handling of the wafer.


FIGURE 11-73 A linear stepper motor used to transport a silicon semiconductor wafer through a laser inspection station.

(

 

相關資訊

相關產品

最新產品

CZ系列倉壁振動器
倉壁振動器用于防止和排除各種料倉由于物料的內摩擦、潮解、帶電、成分偏析等原因引起的“堵塞”、“塔拱”現象;亦可用于清除各種倉壁、管道粘結物料
防閉塞裝置(ZFB)
ZFB防閉塞裝置(倉壁振動器)廣泛應用于冶金、化工、建材、火電、煤炭、食品、水泥、制藥、化肥、糧食、鑄造、陶瓷、磨料等行業中貯料倉的防閉塞之用。
慣性振動器(ZG)
ZG慣性振動器廣泛用來作為各種振動機械(如振動給料機、振動輸送機、振動篩分機、振動落砂機、振動破碎機、振動提升機、振動試驗臺等)的激振源
振動電機
振動電機礦山、鑄造、冶金、煤炭、電力、糧食、港口、化工、建材、機械、陶瓷等工業部門的理想配套設備

最新資訊

隨機鏈接

振動熱料輸送機

無軸螺旋輸送機

煤矸石粉碎機

濕料粉碎機

大傾角帶式輸送機

大傾角皮帶機

南通康誠重工機械有限公司   地址: 江蘇省海安縣開發區南海大道(東)8號 網址: http://ninedragonsbrewery.com

電話:0513-80686000  88773999 傳真:0513-80686060

 聯系人: 吳先生 13506276000(24小時服務熱線) E-mail:info@ntscjx.com 技術支持:天正企劃

分享到:
熟女如虎的丰满熟妇啪啪 | 91精品人妻人人做人碰人人爽 | 日本中文字幕爱丝袜 | 最近最新MV字幕免费观看 | 日韩中文字幕在线观看 | 久国久产久精永久网页 | 精品中文字幕麻豆出品 | 特级西西444Ww高清大胆 | 男女啊啊啊啊爱爱爱爱 | 波多野结衣一二三区 | 农民人伦二区三区全集观看 | 囯产精品久久久久久久久鸭脖高潮 | 国产精品一区二区不卡 | 精品国产乱码一区二区三 | 午夜拍拍拍拍拍拍拍拍拍拍拍 | 久久91欧美特黄A片 十五分钟高清无码视频 | 性精品 A片天美 | 国产视频一区二区在线观看 | 99成人乱码一区二区三区网站 | 亚洲高清无码网站 | 哔哩哔哩视频免费播放 | 蜜臀久久99精品久久久久久白杨根 | whichAV最新中文视频 | 中文字幕日韩欧美一区二区三区 | 欧美性夜黄A片爽爽免费视频 | 美女特黄AAAAAAAA| 欧美黑人一级A片免费看 | 老司机啪啪视频免费欧美日韩 | 国产天堂一区二区三区在线观看不卡 | 国产成人免费观看视频 | 亚洲中熟老妇女久久竟 | 老熟妇高潮一区二区高清视频 | 欧美成人无码片免费看A片秀色 | 一级黄色片在线免费看 | 美女网站高潮喷水45分钟 | 欧美喷潮喷水失禁合集 | 美女高潮喷水网站一区二区三区 | 午夜福利在线播放 | 性一交一乱一交A片久久四色 | 农村亂倫一級A片 | 91精品无码少妇a 6 2v蜜桃 |